1 thought on “Which master knows the production process of the rhinestone, can you explain it in detail? Thank you.”
Tabitha
1. Diamonds: It is made of a high -lead crystal glass round type with many chemical raw materials, and then a type of drilling product made by grinding and polishing. It is currently the most common and most common raw materials such as.
2, process:
(1) The melting furnace: The melting furnace of the full electrode high -quality steel brick system can be used as 0.2 tons or 0.5 tons. You can also use other simple method.
(2) Raw materials: It must be screened strictly, and strict formulas can melt high -quality billets. It contains at least 25%of the crystal glass materials, so that the refractive index is high, the product quality can be good. Therefore, the material is good to get better.
(3) Embryoing: Use a professional machine for glass liquid type, which must be strictly annealing to ensure its quality and mechanical properties.
(4) Machine: The machines used in production are professional machines, automatic equipment controlled by electronic pneumatic control.
(5) All technical requirements for the tooling fixture used on the machine used on the machine, including the tools used by sticky rhinestones, are very strict.
(6) The glue powder used for rhinestone blank bead grinding, that is, sticky glue powder, which is also self -made for special use.
(7) The diamond sand used for grinding is also self -made, which has strict requirements on its process, and it is owned by specialty.
(8) The polishing wheel used for polishing is to polish the grinding rhinestone blank. The purpose is to throw the diamond blanks into a diamond -like shining. This wheel is dedicated to the production of chemical materials.
(9) Cleaning: It is to wash the diamonds that have been thrown away to achieve no dirt.
(10) Test: Put the cleaning rhinestone under the light to detect the finished product.
(11) Siege: It is to separate the size of the drill, and each model must be separated.
(12) Plating: Placing the diamond bottom of the silver to increase its reflection, that is, reflect the brightness, and all equipment formulas are used for specialization.
(13) Protective film: It is plated silver, and then spray a layer of protective silver protection film to avoid yellowing when the silver layer is exposed to the atmosphere. Brightness and use time.
(14) Packaging: The purpose of the packaging is the label of the brand, and it is also to avoid rubbing flowers in inventory transportation.
(15) Inventory: Classification, division, and pay attention to air pollution.
Rhilifornia production process process:
grinding diamond process:
to preheat the fixture-> 斜 ― —> )-> Landscape polishing (8 noodles )-> docking the material-> slope grinding (other eight noodles )-> slope polishing (other 8 surfaces )-> plane grinding-> plane polishing-> feeding feeding -> Cleaning-> Test-> Siege-> Plating-> Spray Protection Film-> Packaging-> Products can be sold.
1. Diamonds: It is made of a high -lead crystal glass round type with many chemical raw materials, and then a type of drilling product made by grinding and polishing. It is currently the most common and most common raw materials such as.
2, process:
(1) The melting furnace: The melting furnace of the full electrode high -quality steel brick system can be used as 0.2 tons or 0.5 tons. You can also use other simple method.
(2) Raw materials: It must be screened strictly, and strict formulas can melt high -quality billets. It contains at least 25%of the crystal glass materials, so that the refractive index is high, the product quality can be good. Therefore, the material is good to get better.
(3) Embryoing: Use a professional machine for glass liquid type, which must be strictly annealing to ensure its quality and mechanical properties.
(4) Machine: The machines used in production are professional machines, automatic equipment controlled by electronic pneumatic control.
(5) All technical requirements for the tooling fixture used on the machine used on the machine, including the tools used by sticky rhinestones, are very strict.
(6) The glue powder used for rhinestone blank bead grinding, that is, sticky glue powder, which is also self -made for special use.
(7) The diamond sand used for grinding is also self -made, which has strict requirements on its process, and it is owned by specialty.
(8) The polishing wheel used for polishing is to polish the grinding rhinestone blank. The purpose is to throw the diamond blanks into a diamond -like shining. This wheel is dedicated to the production of chemical materials.
(9) Cleaning: It is to wash the diamonds that have been thrown away to achieve no dirt.
(10) Test: Put the cleaning rhinestone under the light to detect the finished product.
(11) Siege: It is to separate the size of the drill, and each model must be separated.
(12) Plating: Placing the diamond bottom of the silver to increase its reflection, that is, reflect the brightness, and all equipment formulas are used for specialization.
(13) Protective film: It is plated silver, and then spray a layer of protective silver protection film to avoid yellowing when the silver layer is exposed to the atmosphere. Brightness and use time.
(14) Packaging: The purpose of the packaging is the label of the brand, and it is also to avoid rubbing flowers in inventory transportation.
(15) Inventory: Classification, division, and pay attention to air pollution.
Rhilifornia production process process:
grinding diamond process:
to preheat the fixture-> 斜 ― —> )-> Landscape polishing (8 noodles )-> docking the material-> slope grinding (other eight noodles )-> slope polishing (other 8 surfaces )-> plane grinding-> plane polishing-> feeding feeding -> Cleaning-> Test-> Siege-> Plating-> Spray Protection Film-> Packaging-> Products can be sold.